Terminology
Measurement ...
-
O.D. - Outside Diameter
I.D. - Inside Diameter
I.L. - Inside Length
O.L. - Outside Length
I.W. - Inside Width
W/W - Wall Weight
O.A.L. - Overall Length
O.A.D. - Overall Diameter
Duro - Durometer shore "A"
-
P.U. - Polyurethane
Neo. - Neoprene
Ltx. - Latex
Cond. - Conductive
-
Bag
Donut Bag
Closure
Plug
T-Plug
Plug Washer
Sealing Tape
Sleeve
Bellows
Bulb
Knee Sock
Funnel
Boot
Neck
Wrist
Liner
Bladder
-
Container
Container with removable bottom
Sealing Ring
Sealing Ring with bottom
Sealing Ring with bottom and De-Airing tube hole
Vacuum Can
Mandrel - Pressing
Mandrel - Powder Fill (donut bag style, removable)
Common Terms ...
-
Hardcoat Anodized - Electroplated surface, 6061 aluminum mandrels only,
increased surface hardness.
Teflon Hardcoat Anodized - Hardcoat plus teflon, increased surface
hardness, decreased adhesion.
De-Airing Tube - Pathway from powder fill cavity allowing partial
vacuum applications.
Alignment Pin Holes - For locating pressing mandrel inside bag bottom
and plug or closure.
Powder Fill Cavity - Loose powder size pre-pressing, Bag I.D. * Bag I.L.,
less plug or closure length.
-
Polyurethane Bag - Mold Core, Mold Case, Mold Base
Polyurethane Plug - Mold Case, Mold Base, Alignment pin pouring spider
Rubber Bag - Bag Form Tool
Rubber Closure - Closure Form Tool
Home Isostatic Pressing Other Products Facilities Reference Pictures Contact